Seatel USAT 30

The USAT 30 is the latest in the long line of how-did-we-ever-live-withoutthis technology products from Sea Tel that are redefining global maritime communications. Our edge-of-your-seat products are not just breaking the mold, but busting through it.

The USAT 30 Ku-band antenna is a 75 cm Ultra Small Aperture Terminal marine stabilized antenna system for broadband connectivity. Incorporated in the design are some of the leading technology concepts to reduce its size and match the performance of some of our bigger systems. It complements our range of other USAT and VSAT antennas; it is aesthetically pleasing for mega yachts as well as rugged enough for a workboat. The platform is designed to become part of the ship. It withstands the harshest weather nature can throw at it. In fact, that is practically what we do when we test our systems.

USAT 30 is not designed for compromise. It is packed with high performance features that track satellites faster than the wind can change direction or the tides can swell. The pointing accuracy of this antenna is a result of over 10 million person hours of development effort. Perhaps that is the number one reason why Sea Tel antennas often work trouble free for years and years.

Go ahead, explore the edges of the world but always stay at the center of your communication needs with Sea Tel.


Specifications

Antenna: 75 cm/30″, Ring Focus feed with motorized AutoPol
Recieve gain: 39.0 dBi @ 14.25 GHz
Transmit gain: 37.0 dBi @ 11.85 GHz
G/T: 16 dB/K calculated at 12 GHz (clear sky @ 30 degrees elevation)
Meets FCC EIRP Spectral Density Mask @ 17.4 dBW/4 KHz output EIRPsd -21.6 dBW/4 KHz input EIRPsd
Pedestal Type: Closed Loop Servo
Pointing Accuracy: 0.2° RMS @ 20° roll
Elevation Range of Motion: +2° to +75°
Azimuth Range of Motion: 680°
Radome Dimensions (max): 99.1 cm/39″ diameter x 101.7 cm/40″ high
Total Weight with Radome: 132 lbs/60 kgs

Features

  • Better antenna performance of almost 3 dB allows sailing further out on the fringes of the footprint.
  • Higher carrier to noise ratio allows even more reliable communications anywhere within the footprint
  • Trend-blazing pointing accuracy of better than 0.2°
  • Works with or without ship’s gyro
  • Lighter weight
  • Install in hours instead of days
  • Access remotely from anywhere and anytime

Seatel USAT 24

The Sea Tel Model USAT 24 is a 60 cm Ultra Small Aperture Terminal for Broadband connectivity in SCPC or TDMA networks. It is the first 60 cm marine antenna to meet FCC’s and ETSI’s specification allowing multi mode use with Spread Spectrum

Building on the success of the commercial grade 2406 VSAT, the USAT 24 is designed for the Leisure market, specifically Inter-Coastal vessels to be complemented by the ST 24 (60 cm) TV receive only antenna. Services are offered on a number of platforms such as: Hughes, Viasat and iDirect with optimal satellite coverage areas provided by the leading satellite operators.

The USAT 24 is one of the smallest and lightest, Ku-band antenna’s for marine broadband applications which while offered at a low price, continues to provide uncompromised Sea Tel performance and quality.

The Sea Tel USAT 24 Series utilizes the DAC-2202 Antenna Control Unit. The DAC 2002 is a 19″ rack mount unit (1.75″ tall) featuring: (3) RS-232/422 Serial Ports: (1) full function M&C and (2) NMEA ports for heading. GPS input and modem compatible, reformatted GPS output (GGA/GLL); (1) Ethernet port allowing (2) full-function TCP/IP M&C ports; (1) multi-user HTML interface port for setting all DAC parameters and viewing the current DAC status; (1) UDP download port for updating software in the Comm Interface. Remote access cabable.


Specifications

Antenna: 60 cm/24″ Ring Focus feed
Recieve gain: 34.0dBi @ 10.95 GHz
Transmit gain: 36.0dBi @ 14.0 GHz
Radome: 70cm / 27.2″ D X 68cm / 26.6″ H (Frequency Tuned)
Weight: 45Kg / 99.4 lbs max.
Ship’s Motion: +/- 25° Roll and +/- 10° Pitch
Warranty: 1 year
  • Linear polarized feed with Auto Pol
  • 8W BUC version only
  • Built-In GPS for fast satellite acquisition
  • Azimuth Range of Motion: 680 Degrees (Limited)
  • Elevation Range of Motion: +2° to +75°
  • Built-in test capability, run from antenna control unit or PC
  • Windows M&C program
  • Built-in test includes Strip Chart Recorder
  • Remote Diagnostic Capable
  • Single or Quad Band LNB options
  • 13.5 dB / K calculated G/T @ 12 GHz (Clear sky, 20 degrees elevation)
  • Meets FCC EIRP Spectral Density Mask @ -21.6 dBW / 4KHz
  • < 0.2° RMS mis-pointing @ +/- 20° / 10°

Seatel 9797

The Sea Tel Model 9797 radical offset antenna is our most efficient ever C-band, X-band and Ku-Band marine stabilized antenna system. The Model 9797 is both INTELSAT and DSCS compliant. You get more through-put using the same or lesser amount of valuable deck space.

Also available as a dual-band selectable C and Ku-Band system for complete flexibility. Innovative Radical Offset antenna technology provides unparalleled efficiency and performance. An unmatched range of additional powerhouse features means a system you can rely on whatever the weather or the sea conditions.

The Sea Tel 9797D Utilises the DAC 2202 Antenna Control Unit. The DAC 2202 is 19” rackmount unit (1.75” tall) featuring: (3) RS- 232/422 Serial Ports; (1) full function M&C and (2) NMEA ports for heading, GPS input and modem compatible, reformatted GPS output; (1) Ethernet port allowing (2) full function TCP/ IP M&C ports; (1) multi-user HTML interface port for setting all DAC parameters and viewing the current DAC status; (1) UDP download port for updating software in the Comm Interface. DAC 2302 is available for 70/140 MHz receivers.


Specifications

Recieve gain: : 38.5dBi @ 3.95GHz / 47.75dBi @ 11.85GHz
Transmit gain: 41.7dBi @ 6.18GHz / 48.45dBi @ 14.25GH
Radome: 3.65m/144” D x 3.6m/142” H
Ship’s Motion: +/- 25º Roll or +/-20º Roll and +/- 15º Pitch
Warranty: 1 year

Features

  • Automatic satellite acquisition
  • Circular/linear C/Ku. Circular X-Band
  • Automatic linear polang positioning
  • Optional KU band drop in feed for dual band operation
  • Internal tracking receiver
  • Unlimited azimuth (no cable unwrap)
  • Built-in test capability, run from antenna control unit or PC
  • Windows M&C program/
  • All antenna control functions
  • M&C for antenna mount RF equipment, up/down converters
  • Built-in test includes Strip Chart Recorder
  • Remote Diagnostics
  • Meets Navy MIL-STD-901D GRADE B shock standards and MIL-STD-461 EMI & RFI standards (including 200V/M)
  • Brake System on EL and CL axes to prevent damage due to loss of power
  • Meets MIL-STD-167-1 Vibration

Mar 08

Seatel 6012

Seatel 6012

The Sea Tel 6012 is a 3-Axis marine stabilised antenna system compatible with most Ku-band satellites. The revolutionary architecture of this 1.24 meter system is based on Sea Tel’s industry leading XX09 marine stabilized antenna system. The 6012is the industry’s first 1.5m Ku-band only system powered by integrated marine antenna (IMA) software, supplied in a frequency tuned radome. Featuring an integrated control unit (ICU) that offers a single box electronic control solution to maintain the best and most efficient pointing accuracy in the maritime market. With its extended web based secured user interface, built-in remote management capabilities it offers integration into network management systems through its Media Xchange Point (MXP), first seen on the 4012 system.

The intuitive web user interface accessible from practically any internet-enabled device including mobile devices, with secured socket layer (SSL) password protection, built-in remote management capabilities, multi-level data analysis capability and easy integration into network management systems through itsMedia Xchange Point (MXP), make IMA software enabled Sea Tel 6012 ready to face the communications needs of the maritime market in the 21st century.

Sea Tel 6012 is easy to install and designed to meet some of the toughest shock and vibration specifications, such as IEC 60721, IEC 60945 and MIL STD 167-1. The same RF components used in the design of Eutelsat type approved Sea Tel 6009 systems are also used on this antenna system providing unparalleled reliability.

 


Specifications

Reflector size: 1.5m/58in D Ring Focus
Radome 76 Inch (2.01m/79.1in D x 2.01m/78.9in H) or
optionally 81 Inch with air conditioner
(2.05m/80.8in D x 2.46m/96.9in H) Frequency Tuned
Tx Frequency (Ku-band): 13.75-14.5 GHz
Rx Frequency(Ku-band): 10.7-12.75 GHz
Tx Gains (Ku-band): 45.1dB @ 14.25GHz
Rx Gains (Ku-band): 44.0 dB @ 12.5GHz
G/T (calculated) 21.9 dB/k (In Radome)
BUC 8W, 16W or higher
Pedestal Type 3-axis
Azimuth Unlimited
Elevation Joint Angle -15° to +115°
Weight 505lbs/229kg
Polarization Linear Cross-pol or Co-pol (selectable from below deck)
Stability Accuracy 0.1° RMS
Ship’s Motion +/-20 degrees roll; +/-10 degrees pitch
Vibration and Shock IEC 60721-4-6, Mechanical Class 6M3

Features

  • Transmission rate is compatible with many different types of modems, networks and services.
  • IP access to the internet and corporate networks enabling fast downloads of large data files and e-mail.
  • Brake system on EL and CL axes to prevent damage due to loss of power.
  • Efficient spectral use maximizing cost per bandwidth.
  • Easy Stand-alone or network compatible installation.

Mar 08

Seatel 5012

Seatel 5012

The Sea Tel 5012 is a 3-Axis marine stabilized antenna system compatible with most Ku-band satellites. The revolutionary architecture of this 1.24 meter system is based on Sea Tel’s industry leading XX09 marine stabilized antenna system. The 5012 is the industry’s first 1.24m Ku-band only system powered by integrated marine antenna (IMA)software, supplied in a frequency tuned 1.68m (66″) radome. Featuring an integrated control unit (ICU) that offers a single box electronic control solution to maintain the best and most efficient pointing accuracy in the maritime market. With its extended web based secured user interface, built-in remote management capabilities it offers integration into network management systems through its Media Xchange Point (MXP), first seen on the 4012 system.

The intuitive web user interface accessible from practically any internet-enabled device including mobile devices, with secured socket layer (SSL) password protection, built-in remote management capabilities, multi-level data analysis capability and easy integration into network management systems through itsMedia Xchange Point (MXP), make IMA software enabled Sea Tel 5012 ready to face the communications needs of the maritime market in the 21st century.

Sea Tel 5012 is easy to install and designed to meet some of the toughest shock and vibration specifications, such as IEC 60721, IEC 60945 and MIL STD 167-1. The same RF components used in the design of Eutelsat type approved Sea Tel 5009 systems are also used on this antenna system providing unparalleled reliability.

 


Specifications

Reflector size: 1.24m (50in) D Ring focus
Radome 1.68m /66in (D) x 1.77m /70in (H)
Tx Frequency (Ku-band): 13.75-14.5 GHz
Rx Frequency(Ku-band): 10.7-12.75 GHz
Tx Gains (Ku-band): 43.0dB @ 14.25GHz
Rx Gains (Ku-band): 41.6 @ 12.5GHz
G/T (calculated) 20.0 dB/k, Clear Sky, 30˚ EL
BUC 8W & 16W LBUC, 8W mini and others
Pedestal Type 3-axis
Azimuth Unlimited
Elevation Joint Angle -15° to +115°
Weight 182kg/400lb
Polarization Linear cross-pol or co-pol (selectable from below deck)
Stability Accuracy 0.1° RMS

Features

  • Easy to install and operate
  • Extensive capabilities for online and offline troubleshooting
  • Intuitive and secured user interface with
    extensive data logging capabilities
  • Fully IP based “plug and play”
    architecture
  • Meeting the high performance
    threshold set by the Sea Tel 5009
  • Mechanically compatible with 5009 spares kits
  • Eutelsat and Anatel approval (pending)
  • Cylindrical matching radome with Sea Tel’s 5004 TVRO antenna 66" radome (Note: 60" standard for 5004)

Mar 08

Seatel 4012

Seatel 4012

Sea Tel 4012 GX is a 3-Axis marine stabilized antenna system compatible with most Ku-band satellites and optionally convertible to Ka-band to work on Inmarsat’s Global Xpress network. The revolutionary architecture of this 1-meter (1m) system is based on Sea Tel’s industry leading 4009 marine stabilized antenna system. The 4012 GX is the industry’s first highly integrated Ku to Ka upgradable system powered by integrated marine antenna (IMA) software.

The specially engineered radome design of the 4012 GX allows the system to achieve peak gains with both Ku and Ka band networks. The 4012 GX can be easily upgraded in the field in a few short steps to work with the Global Xpress network. Sea Tel 4012 GX has an integrated control unit (ICU) that offers a single box integrated electronic control to maintain the best and most efficient pointing accuracy in the maritime market.

The 4012 GX is the first antenna system that is fully optimized to meet the demanding maritime communication needs of the 21st century. The system is easy to install and designed to meet some of the toughest shock and vibration specifications, such as IEC 60721. The Sea Tel 4012 GX has extended web based secured user interface, built-in remote management capabilities and offers integration into network management systems through its Media Xchange Point (MXP).

The 4012 GX not only fulfills the VSAT capacities of today but also promises a smooth transition to the increasingly exciting VSAT possibilities of tomorrow. And since the 4012 GX can be controlled via the internet from most internet enabled devices, it also provides a strong sense of connectivity with the company’s headquarters on shore, thus amplifying VSAT’s natural aptitude for uniting and strengthening any maritime enterprise.

 


Specifications

Reflector size: 41.7 in (106 cm)
Tx Frequency (Ku-band): 13.75-14.5 GHz
Rx Frequency(Ku-band): 10.7-12.75 GHz
Tx Gains (Ku-band): 40.8dBi @ 14.25GHz
Rx Gains (Ku-band): 39.8dBi @ 12.50GHz
System G/T (typical), Ku-Band (30° elevation, clear sky): 18.0dB/k (In Radome)
Elevation Range of Motion: -15° to +115°
Azimuth: Unlimited
Cross level: +/- 35°
Stability Accuracy: 0.1° RMS
Operational Shock and Vibration: Operational: IEC-60945,Survival: IEC-60721 and MIL-STD 901D
EMI/ EMC Compliance: EN 301-489, EN 301-428, EN 302-340 (Ku Band)
Safety Compliance: ETSI EN 60950

Features

  • Easy to install and use
  • Extensive capabilities for online and offline troubleshooting
  • Intuitive and secured user interface with extensive data logging capabilities
  • Meets the high performance threshold set by Sea Tel 4009 system
  • Fully IP based “plug and play” architecture.
  • Meets the high performance threshold set by Sea Tel 4009 system<
  • Same bolt patterns as the 4009 system
  • The RF package is field-upgradable from Ku to Ka band (optional)
  • State-of-the-art lighter weight, frequency tuned radome that works with Ku and Ka band services

Mar 08

Seatel 3612

Seatel 3612

The Sea Tel 3612 is a 3-Axis marine stabilized antenna system compatible with most Ku-band satellites. The revolutionary architecture of this 90cm system is based on Sea Tel’s industry leading XX09 marine stabilized antenna system. The 3612 is the industry’s first 90cm Ku-band only system powered by integrated marine antenna (IMA) software, supplied in a frequency tuned radome. Featuring an integrated control unit (ICU) that offers a single box electronic control solution to maintain the best and most efficient pointing accuracy in the maritime market. With its extended web based secured user interface, built-in remote management capabilities it offers integration into network management systems through its Media Xchange Point (MXP), first seen on the 4012 system.

The intuitive web user interface accessible from

practically any internet-enabled device including mobile devices, with secured socket layer (SSL) password protection, built-in remote management capabilities, multi-level data analysis capability and easy integration into network management systems through itsMedia Xchange Point (MXP), make IMA software enabled Sea Tel 3612 ready to face the communications needs of the maritime market in the 21st century.

Sea Tel 3612 is easy to install and designed to meet some of the toughest shock and vibration specifications, such as IEC 60721, IEC 60945 and MIL STD 167-1. The same RF components used in the design of Eutelsat type approved Sea Tel 5009 systems are also used on this antenna system providing unparalleled reliability.

 


Specifications

Radome: 1.27m /50in (D) x 1.49m /58.5in (H)
Reflector size 0.91m (36in) D Ring focus
Tx Frequency 13.75-14.5 GHz
Tx Gains 41.5dBi @ 14.25GHz
Rx Gains 39.3dBi @ 11.70GHz
G/T (calculated) 18.0 dB/k, Clear Sky, 30˚ EL
BUCs 8W & 16W LBUC, 8W mini and others
Pedestal Type 3-axis
Azimuth Unlimited
Elevation Joint Angle -15° to +115°
Weight 132kg / 292lb
Polarization Linear cross-pol or co-pol
(selectable from below deck)
Stability Accuracy 0.1° RMS

Features

  • Easy to install and operate
  • Extensive capabilities for online and
    offline troubleshooting
  • Intuitive and secured user interface with
    extensive data logging capabilities
  • Meeting the high performance
    threshold set by the Sea Tel 4009
  • Fully IP based “plug and play”
    architecture
  • Same radome as the 4009 (50")
  • Eutelsat and Anatel approval (pending)
  • Cylindrical matching radome with Sea Tel’s 4004 TVRO antenna 50" radome (Note: 60" standard for 5004)

Seatel 9711 and QOR

Quadrature Oriented Reflectors, QOR technology based antenna systems are the leading-edge systems for truly global operations. QOR technology facilitates full flexibility of operation on C and Ku-band networks and requires minimal manual intervention while switching from C-band circular to C-band linear, A Pol to B Pol, or from C-band to Ku-band.

The 9711 QOR system combines a 2.4m C-band antenna with a 1.2m Kuband antenna on the same pedestal. In addition, the C-band antenna utilizes a feed that combines both circular and linear operation, all in one product. The user can switch from C-band to Ku-band with a simple push of a button.

The software calculates the antenna’s offset values and targets according to the user’s preferences. The 9711 QOR antenna operates on C-band A Pol, C-band B Pol, C-band linear, Ku-band Cross Pol, and Ku-band Copol. This eliminates the need to climb into the Radome to change the feed. The switch over from one network to another can be accomplished in less than one minute.

The 9711 QOR system is fully compatible with OpenAmip and ABS technology. By combining multiple option files in a single modem, the user can make near seamless transitions from C-band circular A Pol to B Pol, C-band linear, and Ku-band satellites.

The 9711 Technology uses Generation 2 electronics in the pedestal control unit. This is the same electronics used on XX09MK2 and XX10 series antenna systems, eliminating the need for an external level cage, and combines the motor driver assembly which performs diagnostics and improves troubleshooting capabilities on all 3 axes.

QOR technology eliminates the need for a second antenna on the vessel. The QOR based antenna systems provides a significant productivity improvement and an all-in-one communication solution for truly global operation.


Specifications

Radome: 144″ typical. 168″ optional
Pedestal Type: 3 Axis: Azimuth, Elevation, and Cross Level
Designed to Meet: MIL STD 167-1, MIL-STD-901D and MIL-STD-461
Response Rate: >100 Deg./sec
Stabilization Accuracy: 0.1 Deg.
Ship’s Motion: +/- 25 deg roll, +/- 25 deg pitc

C-Band

Antenna: 2.4M offset
Feed Assembly C-band circular/linear selectable
Frequency Range RX: 3.4-4.2 GHz TX: 5.850-6.725 GHz
G/T 20.2dB/K (in Radome) @ 3.95 GHz
Antenna GainReceive:38.5 dBi @ 3.95 GHzTransmit: 41.7 dBi @ 6.18
Elevation Range -15 to +100 degrees
Azimuth Range Unlimited

Ku-Band

Antenna: 1.2M offset
Feed Assembly Ku-band linear polarized (XP, Copol)
Frequency Range RX:10.7-12.75 GHz TX: 13.75-14.5 GHz
G/T 20dB/k (in Radome) @ 11.701 GHz
Antenna GHzReceive: 41.6 dBi @ 12.5 GHz Transmit: 43.0 dBi @ 14.25 GHz
Elevation Range -15 to +115 degrees
Azimuth Range Unlimited

Features

  • Easy to install and use
  • Extensive capabilities for online and offline troubleshooting
  • Intuitive and secured user interface with extensive data logging capabilities
  • Meets the high performance threshold set by Sea Tel 4009 system
  • Fully IP based “plug and play” architecture.
  • Same bolt patterns as the 4009 system
  • The RF package is field-upgradable from Ku to Ka band (optional)
  • State-of-the-art lighter weight, frequency tuned radome that works with Ku and Ka band services

Mar 08

Seatel 3011

Seatel 3011

The Model 3011 is the latest 3-Axis marine stabilized antenna system from Sea Tel built for sub 1m networks. The 3011 design incorporates the latest frequency-tuned radome design and electronics used in our industry-leading XX09 series systems.

The 3011 Ku-band antenna is a 75cm (30in) marine stabilized antenna system for broadband connectivity. Incorporated in the design are some of the leading technology concepts to reduce its size and match the performance of some of ourbigger 1m systems. Model 3011 is built on the industry-leading stabilization platform with stabilization accuracy of 0.2° (RMS). It withstands the harshest weather nature can throw at it. In fact, that is practically what we do when we test our systems.

The 3011 antenna systems comes standard with the Co Pol option, allowing customers global Ku coverage on co pol or cross pol services.

Model 3011 is not designed for compromise. It is packed with high performance features that acquire the satellite and maintain tracking with industry-leading Sea Tel tracking algorithms. The fast response rate to the ship’s motion, the next generation electronics and the four axes of pointing and three axes of stabilization easily makes Model 3011 the industry’s most trusted system in its class.

Go ahead, explore the edges of the world but always stay at the center of your communication needs with Sea Tel.


Specifications

Antenna: 75cm (30in), Ring Focus feed with motorized AutoPol
Transmit Gain: 39 dBi @ 14.25 GHz
Receive Gain: 37 dBi @ 11.85 GHz
G/T: 16 dB/K calculated at 12.0 GHz (typical)
Meets FCC EIRP Spectral Density Mask @ -21.6dBW/4KHz input EIRPsd
Pedestal Type: Closed Loop Servo
Pointing Accuracy: 0.2° RMS @ 20° roll
Elevation Range of Motion: -15° to +115°*
Azimuth Range of Motion: Unlimited
Radome Dimensions (max): 1.12m (44.1 in) diameter x 1.24 m (48.8 in) high
Total Weight with Radome (typical): 180 lbs (82 kgs)*

Features

  • Highly efficient, 75cm (30in) 3-axis VSAT system.

  • Solid state rate sensors and accelerometers.

  • High torque servo motors.

  • Works with Co Pol or Cross Pol services at Ku-band for global operations.

  • Frequency-tuned radome design for maximum signal strength.

  • Blue Tooth enabled.

  • Higher carrier to noise ratio allows even more reliable communications anywhere within the footprint.

  • Industry leading pointing accuracy of better than 0.2° (RMS).

  • Works with or without ship’s gyro.

  • Access remotely from anywhere and anytime.

  • Better antenna performance allows sailing further out on the fringes of the footprint.

Seatel 9707

The Sea Tel Model 9707D radical offset antenna is our most efficient ever C-band Circular only, stabilized antenna system. The Model 9707D is both INTELSAT and DSCS compliant. You get more through-put using the same or lesser amount of valuable deck space.

Innovative Radical Offset antenna technology provides unparalleled efficiency and performance. An unmatched range of additional powerhouse features means a system you can rely on whatever the weather
or the sea conditions.

The Sea Tel 9707D Utilizes the DAC 2202 Antenna Control Unit. The DAC 2202 is 19” rackmount unit (1.75” tall) featuring: (3) RS-232/422 Serial Ports; (1) full function M&C and (2) NMEA ports for heading, GPS input and modem compatible, reformatted GPS output; (1) Ethernet port allowing (2) full function TCP/IP M&C ports; (1) multi-user HTML interface port for setting all DAC parameters and viewing the current DAC status; (1) UDP download port for updating software in the Comm Interface. DAC 2302 is available for 70/140 MHz receivers.


Specifications

  • Receive gain: 38.5dBi @ 3.95 GHz
  • Transmit gain: 41.7dBi @ 6.18 GHz
  • 20.2 dB/k calculated G/T @ 3.95 GHz (Clear sky, 20 degrees elevation)
  • Radome: 3.65m/144” D x 3.6m/142”
  • INTELSAT Earth Station Standard 601 Rev 9
  • Sidelobes, 100% below 29-25 log mask
  • Ship’s Motion: +/- 25º Roll or +/-20º Roll and +/- 15º Pitch
  • < 0.2º PEAK mis-pointing @ +/- 25º/15º
  • Circular polarization only
  • 25W or 40W Codan versions only
  • Automatic satellite acquisition
  • Internal tracking receiver
  • Unlimited azimuth (no cable unwrap)
  • Windows M&C program
  • Built-in test capability, run from antenna control unit or PC
  • All antenna control functions
  • M&C for antenna mount RF equipment, up/down converters
  • Built-in test includes Strip Chart Recorder
  • Remote Diagnostics
  • Meets Navy MIL-STD-901D GRADE B shock standards and MIL-STD-461 EMI & RFI standards (including 200V/M)
  • Meets MIL-STD-167-1 Vibration
  • Brake system on EL and CL axes to prevent damage due to loss of power
  • Integrated servo amplifiers within the PCU
  • 1-year warranty on parts; 1-year labor.